2012 Chevy Traverse Belt Diagram (2024)

FAQs

How do you find a serpentine belt routing diagram? ›

Some vehicles have the serpentine belt diagram located on a decal somewhere in the engine compartment. But if your car does not have a decal, you can easily look up the diagram in a repair manual or repair database. Another option is to take a photo of the old belt before removal.

A: Commonly a belt routing diagram sticker is on the underside of the hood or in the engine compartment. If there is no diagram, make a sketch of the belt and pulleys before removing the belt.

If You're curious to know if Your 2012 Chevy Traversee has a timing chain, then I've got good news for You. Your Chevy Traverse comes equipped with a timing chain.

EXAMPLE: 6PK1003 » 6 - This indicates the number of ribs on the belt; therefore, this is a 6-rib belt. » PK – The “P” indicates a metric designation, and the “K” indicates the belt is automotive per SAE J1459. » 1003 - This is the effective length of the belt expressed in millimeters.

If the belt is already out of place, locate the driver's manual or the under-the-hood placard, where you'll find a sketch of the routing.

What Does a Serpentine Belt Do? As we mentioned early, a serpentine belt delivers power to your alternator, power steering pump, and air conditioning compressor. In some cases, it also supplies power to your water pump. It's a long, winding rubber band of sorts that is attached to your crank pulley.

What Common Problems Does the 2012 Chevrolet Traverse Have? Problems with the Traverse are fairly serious including engine issues, air conditioning failures, and traction control system faults. A loss of engine power while driving is the most common complaint showing up at 100,000 miles.

The expected lifespan of a Chevrolet Traverse is 200,000 miles. However, many Traverse owners have kept their vehicles for more than that, with some reaching 250,000 miles with only minor issues. Older models are more inclined to rust, which can cause damage to the undercarriage and other components.

There aren't any timing chain recalls for any model year of Chevrolet Traverse. But if you're not sure if your Chevy Traverse has an active recall, you can visit the National Highway Transportation Safety Administration's recall check site and enter your car's VIN.

How much does it cost to replace a serpentine belt on a Chevy Traverse? ›

The average cost for a Serpentine Belt Replacement is between $105 and $141 but can vary from car to car.

First, serpentine belts and timing belts are made out of different materials. Serpentine belts do not have to be as sturdy as timing belts. This is why serpentine belts are made out of rubber, while timing belts are made out of heavy-duty synthetic materials. Timing belts can be made of either neoprene or polyurethane.

The auxiliary drive belt, also named serpentine belt or poly-v belt, is a drive belt that works with the idlers, tensioners and pulleys within the accessory drive belt system. This belt should not be confused with a timing belt, which serves a completely different purpose.

Depending on the engine in your vehicle, the serpentine belt may be located at the front of the engine bay, or it may be along one side. There may be engine covers in the way, so be prepared to remove them if need be.

Place the target tool (the other part of the laser alignment tool) on the pulley that needs to be checked. Rotate the target pulley and observe if the laser is shining on the target. The laser should meet the target tool right on the dedicated center marking. This indicates a properly aligned pulley.